Home > Ultrasonic technology > Ultrasonic technology > Direct cutting > Continuous direct cutting

Continuous direct cutting

Continuous direct cutting

Continuous direct cutting
This technology consists in a continuous ultrasonic cutting and welding in one single pass
Longitudinal ultrasonic cutting of ribbons or labels

SM 1200 W
Ultrasonic device for continuous ribbons cutting and sealing operations
Ultrasonic cutting and welding system

SM 300 W for pin tenter
Ultrasonic cutting and welding system for pin tenters
Ultrasounds slitting of PP-Tape, Technical textile, Textile fabrics

MK 75 W
Affordable ultrasonic direct cutting operation for dense and heavy fabrics up to 300 g/sqm (fabrics for big bags, agrotextiles, geotextiles, carpet backing…)
Ultrasonic edge cutting and welding of woven fabrics

MK / MP 300/1200 W
Ultrasonic direct cutting and sealing to cut and seal the edges of fabric
Ultrasonic equipment for cutting and welding of heavy fabrics

MP 1200 W
Ultrasonic direct cutting to replace the mechanical cutting and hot sealing of the edges
Automatic cross-cutting operation on sun protection cutting table

MK 300 W
Ultrasonic direct cutting and welding to cut and seal the edges of fabric up to 250 g/sqm fabric, at 60 m/min running speed with very good sealing results
Ultrasonic manual cutting on off-line machines

MK 300 W with handle
Ultrasonic manual cutting on stenters, inspection and off-line machines